The CCP-E is a conventional break-glass call point based upon the industry standard KAC world series housing.

The CCP-E IS can be used in hazardous areas and is fully approved to BS5839 Part 2.

From left: DCD-AE3 and DCD-CE3 Combined Heat Detectors, SLR-E3 Photoelectric Smoke Detector, DFJ-AE3 and DFJ-CE3 Fixed Temperature Heat Detector.

The DCD-1E-IS can be used in hazardous areas and incorporates at 60 degrees fixed temperature element, a thermistor and linearising circuit to provide an accurate linear response to heat.

The DFG-60E is a 60 degree fixed temperature heat detector which uses a bi-metallic strip to sense temperature change, therefore consuming no standby current and providing high reliability. It is particularly suited to environments which are exposed to high levels of condensation or are hosed down.

Model DFJ-CE3 is a 90 degree/60 degree Fixed Temperature Heat Detector using a thermistor and linearising circuit to provide an accurate linear response Heat Detector. A third terminal provides integral remote indicator output.

The HF-24 Flame Detector detects the presence of flame within its field of view by sensing the ultraviolet radiation emitted.

The SL3-E3 is a photoelectric Smoke Detector, which is fully compatible with the majority of existing Conventional systems. An integral third terminal provides remote indicator output and the wide voltage range means the SLR-E3 can be installed within security systems.

These conventional detectors are designed to be used in hazardous areas and are fully approved by BASEEFA.

Hochiki's range of Marine-Approved devices includes a photoelectric Smoke Detector, Heat Detector, Bases and surface-mount back box. All are certificated by Lloyd's Register Det Norske Veritas and Germanischer Lloyd.

The SLR-E-IS is designed to be used in hazardous areas and incorporates a remote indicator output and a removable chamber for easy maintenance.

The SPB-ET is a two wire beam detector consisting of an emitter and receiver that operates at distances of 5-100m providing a maximum of 1500 square metres coverage.

The SPB-ET is powered directly from the zone, so no auxiliary power supplies are required. When the zone is reset the detector is reset automatically and the unit can also be interfaced to Hochiki's ESP system by using a CHQ-MZ or CHQ-Z module.

The SRA-ET comes complete over distance of 5-30m, thus giving a maximum coverage of 450 square metres.

The SRA-ET comes complete with a Reflector and Termination Module which fits directly on to a standard U.K. dual back box, this allows the detector to be surface or flush mounted.

The YBN-R/6 is fully compatible with the majority of existing conventional fire alarm control panels and is supplied with square cable clamps for secure and reliable cable termination.

Model YBO-R/6PA is a Conventional Detector Mounting Base for 2-Wire systems where detectors and sounders are on the same zone cables.

A Conventional Detector Mounting Base associated with the New CDX Range of Detectors and is fully compatible with the majority of existing conventional fire alarm control panels

The YBN-R/4(IS) is designed to be used in hazardous areas and is fully compatible with the majority of existing conventional fire alarm control panels.